Windshield wipers are an essential component of any vehicle that helps to ensure a clear view of the road, especially during inclement weather conditions. Over time, however, windshield wipers can wear out and become less effective, making it difficult to see properly while driving. Fortunately, checking and replacing windshield wipers is a relatively easy and inexpensive process that can be done by anyone.

Here’s a step-by-step guide on how to check and replace your windshield wipers:

Step 1: Check your windshield wipers

Before you decide to replace your windshield wipers, you need to check if they actually need to be replaced. To do this, turn on your windshield wipers and observe them closely as they move across your windshield. Look for any signs of wear, such as cracks or tears in the rubber blades, or any streaks or smudges left behind. If you notice any of these signs, it’s time to replace your windshield wipers.

Step 2: Determine the correct size

Before you head to the store to buy new wiper blades, you’ll need to determine the correct size for your vehicle. You can find this information in your owner’s manual or by doing a quick online search. Most wiper blades come in a range of sizes, so make sure to select the right one for your specific make and model.

If you don’t have the manual, you can measure the length of the wiper blades on your car. Use a tape measure to measure from the center of the blade to the tip. Compare the measurements to the wiper size chart provided by the wiper blade manufacturer. The chart will list the recommended sizes for each car make and model.

Step 3: Remove the old wiper blades

To remove the old wiper blades, lift the wiper arm away from the windshield until it locks into place. Then, locate the small tab where the wiper blade attaches to the wiper arm. Press down on the tab and slide the blade off the arm.

Step 4: Install the new wiper blades

To install the new wiper blades, start by sliding the blade onto the wiper arm until it clicks into place. Make sure it is secure and properly attached. Repeat the process for the other wiper blade.

Step 5: Test the new wiper blades

Finally, test the new wiper blades to make sure they’re working properly. Turn on your windshield wipers and observe them closely to make sure they’re wiping your windshield cleanly and smoothly. If you notice any issues, such as streaks or skipping, adjust the blades as needed or try cleaning your windshield with a windshield cleaner.

Checking and replacing your windshield wipers is a simple and important task that can help improve your visibility and safety on the road. By following these steps, you can easily replace your wiper blades and ensure that your windshield wipers are always working at their best.

Learn more maintenance tips as well as safe driving strategies and techniques with a driver safety course. Join 500,000 drivers who have selected a DriveSafe Online defensive driving course. Select I’M READY to lock in your low price now. You can begin the course whenever your schedule allows.